Embroidering with a hoop, Darning – SINGER W1365 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EMBROIDERING WITH A HOOP

It is easy to follov/ a stamped design or to work

free hand when embroidering or monogramming.

(See Fig. 27). Release the pressure from the foot

by pressing down the snap look on the automatic

darner. Turn drop feed knob to DOWN position

(see Fig. 19).

Stretch the fabric in an embroidery hoop, and

place under the needle after removing the presser

foot. Set the stitch width at the size you prefer and

lower the presser bar lifter. Then operate the machine at a rather high speed

the hoop slowly with both hands. Work carefully and be sure to keep fing

of the needle.

'ig. 27

while

IflOvi

Si'S out of tha

Path

DARNING

Release pressure from foot and drop feed as directed above.

Place fabric to be mended under foot, and stitch around hole, moving the fabric f’

and slowly in any direction. To fill in the hole, stitch from center outward,

completing

stitching in fabric.