SINGER W712 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

adjusting

and

changing

"V" BELT

Fig. 55

Fig. 56

Fig. 57

Pone»« a.e «

« « a« chan,« the 'oeU :

(

)

(3)

(4)

.wing are me

Open bobbin winder cover door Fig. ■

tipping it out at the bottom and

ReOove three screws hold« rear

o( LOach.ne,

pivoting around the hand vrheel

„.d move bracket B up to loosen belt and

To adjust "V" belt, loosen screws (A, tig. i

down to tighten.

To remove "V" belt;

(A)

Remove top cover.

(3) Loosen clutch

„g„

^ ^ 3 highest position.

(B)

Shp^elt off

then over motor pulley.

(E) Replace "V" belt by slipping it over nan

(F ) Adjust as noted under No. -•