Removing and replacing bobbing case, To remove bobbin case, To replace the bobbin case – SINGER 9134 User Manual

Page 40: Caring for your machine

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 6

CARING FOR YOUR MACHINE

REMOVING AND REPLACING BOBBING CASE

CAUTION: Before cleaning or adjusting
the machine, remove plug from the socket

outlet.

• Raise presser foot and needle.

• Open slide plate and remove bobbin.

To remove the bobbin case, the needle

plate must be removed first.

Lift needle plate (1) from right corner

and slide out from under foot.

TO REMOVE BOBBIN CASE

• With a small screwdriver, turn lever (2)

back as far as it wi[l go.

• Lift out bobbin case.

TO REPLACE THE BOBBIN CASE

• Guide forked end (3) of bobbin case

under feed (4).

• Draw rim of bobbin case under position

plate (5).

• Turn lever (2) toward you, locking bobbin

case in place.

NOTE: After locking case in place, be sure

it is not tight, but can move slightly..

•

• To replace needle plate, slide it under

pin (6) and push it to the left.

• Press needle plate down in place.

• Insert bobbin and close slide plate.