Attaching a button – SINGER 9134 User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ATTACHING A BUTTON

Flat buttons can be sewn on quickly and easily using the plain zig-zag stitch

RECOMMENDED SETTINGS

Stitch Selection:

Zig-Zag Stitch

Stitch Width:

1 1 1 1

Stitch Length:
Foot:

Button Sewing (H)

Needle Plate:

General Purpose

( A )

Attach Feed Cover (F)

The space between the holes in the

button determines stitch width setting.

Before you can attach a button, the
bobbin thread must be brought up

through the bole in the feed cover (F).

• Raise foot lifter.

• Position both threads under button foot

toward rear of machine.

• Hold needle thread while lowering

needle into hole in feed cover. Raise
needle and gently pull needle thread,

undo loop of bobbin thread that comes
up with the needle. Details on “Raising

the Bobbin Thread” are on page 16.

•

1. Place garment under button foot.

• Position button on garment making

sure the holes in the button are between
the toes of the button foot.

• Lower foot lifter.