Chapter 7. twin - needle stitching – SINGER 7110 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 7. Twin - Needle Stitching
Procedure
The twin-needle simultaneously produces two
parallel, closely spaced lines of pattern stitch
ing. You can stitch with either one or two cor
ours of thread.
• Pattern Group Selector: Stitch desired
• Needle Position; i
• Stitch Width; !
i
A only
> § only^
• stitch Length; . 5 - 4 to suit fabric
• General Purpose Needle Plate
• General Purpose Foot or Special Purpose Foot
• Insert twin-needle.
•
Thread as for single-needle stitching, and
through right eye of needle.
•
Attach detachable spool pin, with felt, on
bobbin winder spindle.
• Place spool of thread on detachable spool
pin and thread machine in usual way.
• Thread through remaining points, making cer
tain to omit the thread guide above the needle
and pass thread through left eye of needle.
A CAUTION; Do not use a stitch width greater than what is recommended. A wider stitch will result In needle breakage.
35