SINGER W8418 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

*JUneadi4Uf. the BaLLin Qaim

Before threading the bobbin case, study Fg. 6, 7

& 8 to get a general idea as to how it is done.

1. Hold the bobbin case with your left hand and put

the bobbin into the bobbin case with your right, leav-

. ing about two inches of the thread end unwound

: Fig. 6). As the bobbin is being inserted in the

bobbin case, the thread flow, you will note, in clockise

(Fig. 6).

2. While holding the bobbin case as before, grasp the

thread end with the right hand, guide it into the

cross slot (Fig. 7).

Then pull it throught under the tension spring of

the bobbin case (Fig. 7) until it enters the delivery

eye (Fig. 8).

Fig. 5

Fig. 7