Jhum to. /locoimnded – SINGER W8418 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

19
JhuM to.
/locoiMnded.
i
SCROLL ,
FOLD
Fig. 29
NARROW HEMMER. V/hile the needle at its highest position,
-eplace regular presser foot with narrow hemmer (Fig. 29). For a
slain narrow hem' make a 1/8 inch double fold for about two inches
dong of fabric. Hold each end of the two inch fold, slip underneath
lemmer. Bring fold up in to the scroll of hemmer, draw foward to
;nd and fasten with point of needle. Lower presser bar lifter. Gently
3ull ends of threads as you stitching.
Guide material slightly to right, and it will automatically take a
iouble turn through scroll.
LACE TRIMMED HEM. To sew a narrow hem and attach lace
;n one stitching, insert lace in the slot next to needle. Sew hem as
ibove, guiding lace in under needle and hem into scroll.
L.^CE EDGE WITH INVISIBLE STITCHING. Hold lace 1/8 inch
from raw edge on right side of fabric. Insert both in scroll as for
plain narrow hem. Let hem roll over and sew in lace. Press lace
Jut Hat along edge with hem turned up. It is possible to have a
ittle fullness in lace by feeding it freely under scroll.
FRENCH SEAM. With right sides together, place top piece of
material 1/8 inch inside edge of lower piece. Insert in hemmer scroll
illowing hem to roll over and sew in top fabric, making French
seam.
FLAT FELLED SEAM. Open out French seam and insert rolled
!dge in scroll of hemmer. Edgestitch to lay seam flat.
HAND ROLLED EFFECT. Use a narrow zigzag stitch, just wide enough to catch both edges
>f the narrow, rolled hem.
QUILTING GUIDE. This guide for making parallel rows of stitching is attached by placing the
jronged holder between the presser foot and the presser foot thumb screw (Fig. 30).