Cmùwuàêàiêif wiik a – SINGER W8418 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
16
CmùwUàêàiêif Wiik a
It is easy to follow a stamped design or
to work free hand when embroidering or
monogramming. (See Fig. 25). Release the
pressure from the foot by pressing down the
snap lock on the automatic darner. Turn the
drop feed knob to the left "E’ which drops the
feed well below the needle plate.
Stretch the fabric in an embroidery hoop,
and place under the needle after removing the
presser foot. Set the stitch width at the size
you prefere and lower the presser bar lifter.
Then operate the machine at a rather high
speed while moving the hoop slowly both hands,
the path of the needle.
Fig. 25
Work carefull and be sure to keep fingers out of
Release pressure from foot and drop feed as directed above.
, , . c t
j
Place fabric to be mended under foot, and stitch around hole, moving the fabric firmly and
slowly in any direction. To fill in the hole, stitch from center outward, completing the stitching
in fabric.