White Rodgers 1F70 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Temperature Levers
Move the HI temperature setting lever to the
highest temperature desired. Move the LO
temperature setting leverto the lowest tempera
ture desired (seefig. 6). The difference between
the two temperature settings is the amount of
setback or setup that will occur at the times you
have selected with the red and blue timer selec
tors. If the two temperature levers are together,
the thermostat will maintain a constant tempera
ture (no setbacks or setups will occur). For
example, if the two levers are set together at
75°F, the room temperature will be maintained
at 75°, no matter how many timer selectors you
have used.
12
Figure 6. Setting temperature levers.
Setting the Program Advance Switch
A CAUTION
The program advance switch cannot be
moved within one hour before or after a
timer selector has changed the setback/
setup time period.
The program advance switch is an extension of
the timer switch, and is located at the top of the
thermostat between the thermostat base and