Note – White Rodgers 1F70 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

One some models, the timer is powered by an
alkaline or rechargeable Nicad battery. There is
a battery included in the thermostat models that
require one (see fig. 4). For shipping, a card

board strip has been inserted between the con

tact and the battery. TO START THE TIMER,

YOU MUST FOLLOW THESE STEPS TO RE
MOVE THE CARDBOARD STRIP!

1. Lift and grasp the tab on the cardboard strip.

2. Hold one finger on the battery to hold it in

place.

3. Gently pull the tab straight out. If the timer

does not start, remove the battery and re

insert it (see REPLACING THE BATTERY).

4. Replace the thermostat cover.

SET THERMOSTAT SWITCHES

AND TEMPERATURE LEVERS

NOTE

Turn on electrical power to system, if you have

not already done so.

This manual is related to the following products:

1F71