Pentax Espio 140V - Manual (Page 5)

ISO 38mm(^^^) 140mm(^) 1
25 0.8-1.6m(2.6-5.1 ft)
50 0.8-2.2m(2.6-7.2 ft) 1.15-1.3m(3.8-4.2ft) '
100 0.8-3.1m(2.6-10.0 ft) 1.15-1.8m(3.8-5.9ft)
200 0.8-4.4m(2.6-14.0ft) 1.15-2.5m(3.8-8.3ft)
400 0.8-6.2m(2.6-20.0 ft) 1.15-3.6m(3.8-12.0ft)
800 0.8-8.8m(2.6-29.0 ft) 1.15-5.1m(3.8-17.0ft)
1600 0.8-12.5m(2.6-41.0 ft) 1.15-7.2m(3.8-24.0ft) '
3200 0.8-17.5m(2.6-58.0 ft) 1.15-10.0m(3.8-33.0 ft)
Í8] FLASH SHOOTING
8-1. Flash effective ranges
m REWINDING THE FILM
IN MID-ROLL
Depress the mid-roll rewind button ( ^ ) with
the protruding part O of the strap clamp.
Check that “0” is blinking before removing the
film from the camera.
10-1
f»3 p n-
uD C O
uD L I Jl 0
J «C
uD •_ »3 =
uJi CO
G 3
ffl TAKING PICTURES
WITH VARIOUS
EXPOSURE MODES
10-1. EXPOSURE MODES
Open the lens protector and press the AF/Self-
timer button (0 AF) to select exposure mode.
1. Single-frame photography (no icon
displayed)
This mode is set by simply opening the lens
protector.
Even if the shutter release button is held
down, only one picture is taken.
2. Self-timer photography (0)
Use of a tripod is recommended.
The picture will be taken 10 seconds after
the shutter button is pressed.
Press the shutter release button halfway
down, confirm the green lamp is lit and
press the shutter release button fully.
The self-timer is engaged and the self-timer
lamp lights. The picture will be taken
approximately 3 seconds after the self-timer
lamp starts to blink.
To cancel the operation before it is
completed, press the Self/AF button (0 AF).
3. Remote control photography ( e)
(Using optional remote control unit)
The self-timer lamp blinks slowly and the
camera is in remote control mode.
Press the shutter release on fhe remote
control unit. The self-timer lamp will blink
rapidly and the picture will be taken after
approximately 3 seconds.
4. Infinity-Landscape photography (iA)
Use this mode to take a distant landscape or
distant subject through a window.
5. Spot AF mode (SPOT AF)
Use this mode to focus on a specific subject.
Focus on the subject with the center of the
AF frame.
• Closing the lens protector cancels the
mode and returns the camera to single­
frame mode.