Lift-up cooktop, Anti-tip device – Sears KENMORE 46520 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

LIFT-UP COOKTOP
The range has a support to hold the cooktop up while
cleaning.
Raise the support as shown in the illustration.
Porcelain
enamel
can
chip
if
dropped.
Handle
porcelain enameled cooktops carefully.
ANTI-TIP DEVICE
A
If your range is removed for cleaning,
servicing or any reason, be sure anti
tip
device
is
re-engaged
properly
when
the
range
is
replaced.
Failure
to take this precaution could result in
tipping of the range and cause injury.
When replacing the range:
1. Hook the loose end of the chain onto the bracket by
slipping the nearest link of the chain Into the slot In
the bracket, making sure the chain Is pulled as tight
as possible and that there Is no excess slack In the
chain after chain is attached to the bracket.
• Excess slack In the chain could allow the range to
tip over.
2. Slide the range all the way back into the counter.
Oncethe range Is pushed back in place, there will be
a small amount of slack In the chain. This Is normal.
NOTE: To insure the device is Installed and re-en
gaged properly, carefully try to tip the range
forward. The device should secure the range
and not allow It to tip.
(Electric model shown;
Opposite side used for Gas models)
18
NEMNT59