beautypg.com

To remove mower (see fig. 16), To install mower (see fig. 16), Service and adjustments – Sears 917.2565 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

SERVICE AND ADJUSTMENTS

A

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

Depress clutch/brake pedal fully and set parking brake.
Place gearshift lever in neutral (N) position.
Place attachment clutch in “DISENGAGED” position.

Turn ignition key “OFF” and remove key.

Make sure the blades

and

all moving parts have

completely

stopped.

Disconnect spark plug wire

from

spark plug and place wire where it cannot come in contact with

plug.

TO REMOVE MOWER (See Fig. 16)

Mower will be easier to remove from the right side of tractor.

Place attachment clutch in “DISENGAGED” position.

Move attachment lift lever forward to lower mowerto its

lowest position.

Roil belt off engine pulley.

Disconnect clutch rod from clutch lever by removing
retainer spring.

Disconnect anti-sway bar from chassis bracket by
removing retainer spring.

Disconnect suspension arms from rear deck brackets

by removing retainer springs.

® Disconnect front links from deck by removing retainer

springs.

® Raise lift ieverto raise suspension arms. Slide mower

out from under tractor.

IMPORTANT:

IF AN ATTACHMENT OTHER THAN THE

MOWER IS TO BE MOUNTED TO THE TRACTOR, THE
R.H. AND L.H. SUSPENSION ARMS MUST BE REMOVED
FROM TRACTOR.

TO

INSTALL

MOWER (See

Fig.

16)

Raise attachment lift lever to its highest position.

Slide mower undertractorwith discharge guard to right
side of tractor.

Lower lift lever to its lowest position.

Install mower in reverse order of removal instructions.

1 9