Sears KENMORE 911.41369 - Manual (Page 21)

»ffif
miims ¥m mmmM
To save you time and money, before making a service call, check the list below for any problem
you may feel you ha ve with the performance of your range. If the problem is some thing you cannot
repair, use the Consumer Service Numbers located at the back of this manual. Wtem making
aiiyeaffej, kmw@ the m@MBmmhes’s mpmlrpafts IIMg use assrf &mre mamaal and ih®
dsf© ®f piirefsase araffaMe»
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The rflspfay ®# y®er
comtml m ilmsMng
“F“ feftewerf fey a
number ®r letter«
Range malfunction. Press the CLEAR/OFF pad. Let the
range coot for 1 hour and place the
range back into an oven operation. If the
problem repeats, call for service.
@wen will n&t w&rk^
i&tmlfy meperatlwe« No power to range. & Check the household circuit breaker
or fuse box.
b. Check to make sure the range is
plugged in.
F©orfs cf® not bake
properfy.
&wen femperafpre
seems inaccmate.
Qwen light é&es mot
work.
a. Oven is not preheated, m.
fe. Improper rack or pan b.
placement.
©» Oven vent blocked or c.
covered.
A Improper use of foil. A
e= Improper temperature e.
setting for utensil used.
f. Recipe not followed. f«
g. Improper oven control g,
calibration.
It. Range and oven rack h.
not level.
Be sure to preheat until the tone
sounds.
Maintain uniform air space around
pans and utensils. See oven cooking
section.
Keep vent clear.
Racks should not be covered during
baking.
Reduce temperature 25 degrees for
glass or dull/darkened pans.
Check recipe and measurement.
Check the temperature adjustment
following this section.
Check the installation instructions for
leveling.
Oven control calibration. See oven cooking section.
a» Light switch is in off a. Check switch setting,
position.
tu Bulb needs to be • Check or replace light
replaced. bulb.
21 before calling forservice continued