Sears 200.71988 - Manual (Page 12)

16. POWERING A 110V AC DEVICE
To operate a 110V AC device:
16.1 Open the protective cover of the AC power outlet on the front panel of the
Portable Power 1150.
16.2 Plug the 110V AC device into the AC power outlet, and place the Inverter/
Compressor Switch in the INVERTER position.
16.3 If the device does not operate properly when first connected to the in­
verter, push the inverter rocker switch ON (I), OFF (0), and ON (I) again
in quick succession. If this procedure is not successful, it is likely that the
1150 inverter does not have the required capacity to operate the device
intended.
16.4 Charge the Portable Power 1150 as soon as possible after each use.
CAUTION: Incorrect operation of your inverter may result in damage and
personal injury. The inverter output is 110V AC and can shock or electro­
cute the same as any ordinary household AC wall outlet.
17. 110V AC ELECTRICAL DEVICE EXAMPLE RUN-TIME CHART
Appliance Type
Estimated
Power
Estimated
Time*
Spotlights, Sump Pumps, DVD Players 100 Watts 1.5 Hours
Faxes, TVs, Small Power Tools 150 Watts 1.25 Hours
Computer Printer, Medium Power Tools, Blenders 200 Watts 55 Minutes
The maximum continuous load is 400 watts.
*NOTE: Estimated run-times. Actual time may vary. Times are based on
the internal battery being new, fully charged and operated at room tem­
perature.
10 '