Sears 200.71988 - Manual (Page 10)

11. USING THE INFLATOR
CAUTION: Read instructions of the product being inflated before using
the inflator. Avoid over inflation, do not exceed the manufacturer’s recom­
mended pressures. Do not leave the inflator unattended during use.
11.1 Attach the corrugated hose with end adapter to the high-flow inflator outlet
located directly above the inflator ON / OFF switch on the back of
the 1150.
11.2 The main accessory adapter attached to the corrugated hose accommo­
dates up to 4 sizes. If another size is needed an additional adapter can be
attached to the end of the main accessory adapter.
11.3 Insert the adapter into the product to be inflated.
11.4 Push the inflator switch to the ON position and inflate product.
11.5 When product is inflated to the desired level, push the inflator switch to the
OFF position and remove the adapter.
12. ESTIMATED TIME FOR INFLATING
24” Beach Ball 1 to 3 minutes
Pool Raft 4 to 6 minutes
Queen-size Air Mattress 4 to 8 minutes
2 Person Boat 8 to 10 minutes
■! imes may vary depending on size and product features.
13. USING THE DEFLATOR
13.1 Attach the corrugated hose with the end adapter to the high-flow deflator
outlet which is located on the right side of the 1150.
13.2 The main accessory adapter attached to the corrugated hose accommo­
dates up to 4 sizes. If another size is needed, an additional adapter can be
attached to the end of the main accessory adapter.
13.3 Insert the adapter into the item to be deflated.
13.4 Push the inflator switch to the ON position and deflate item.
13.5 When product is deflated to the desired level, push the inflator switch to
the OFF position and remove the adapter.