Canon 210 - Manual (Page 62)

62
Using the Face Self-Timer
Using the Face Self-Timer
To take a photo that includes the photographer, such a group photo,
compose the shot, and press the shutter button. The camera will shoot
approximately two seconds after you enter the shot and it detects your face
(p. 84) .
Choose .
● Choose in Steps 1 – 2 on p. 54 , then
touch .
● Touch , then touch Ú.
Compose the shot and press the
shutter button halfway.
● Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
X The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
X The lamp will blink and the self-timer
sound will play.
Changing the number of shots
After touching on the screen in Step 1, touch op to change the number of
shots. Touch Ú to complete the setting.
• Shutting both eyes will also be detected as a wink.
• If a wink is not detected, the shutter will release approximately 15
seconds later.
• If there are no people in the shot when the shutter button is pressed
fully, the camera will shoot after a person enters the shot and winks.