Assembly – Sears PROFORM XP 100U 831.21641.1 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY

Assembly requires two persons.

Place all parts of the exercise cycle in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench
screwdriver

and Phillips

Use the part drawings below to identify the small parts used in assembly. The number in parentheses below

each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers
to the quantity needed for assembly.

Note; Some small parts may have been preattached for shipping. If a

part is not in the parts bag, check to see if it has been preattached. If a part is missing, call toll-free

1-888-533-1333.

Identify the Front Stabilizer (2), which is narrower than

the Rear Stabilizer (not shown). While another person

lifts the front of the Frame (1), attach the Front
Stabilizer to the Frame with two M10 x 73mm Button
Screws (33) and two M10 Split Washers (34).