Plug in the machine and switch bn the power – Sears OVERLOCK 385. 564180 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Plug in the Machine and Switch bn the Power
Foot Control Use
SECTION 2. ■ PREPA'RE YOUR MACHI^
NOTE.
Before
inserting
the
plug
into
your
machine, be sure the power switch is
OFF.
1.
Check your outlet to be sure it is a 110 to 120
Volt AC outlet.
2.
Insert the machine plug into the three-prong
plug connector, as shown. It will only fit one
way.
3.
Insert the power supply plug into the wall
outlet.
on the power and sewing light.
! to tu rn
SAFETY FEATURE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.
The foot control regulates the speed at which
you sew.
To increase speed, gently press down with the
ball of your foot.
To 'decrease speed, release your foot pressure
slightly.
NOTE:
The foot control is sensitive and
will
increase
or
decrease
your
sewing speed immediately. Practice
on a scrap of fabric to regulate your
sewing speed to your taste and
needs.