Sears OVERLOCK 385. 564180 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
® Threading the Lower Looper
Loosen screw and remove presser foot assembly.
Place the spool of thread on the right side spool pin.
10
* Points to thread for lower looper are marked
in green.
(T) Draw the thread through
the right side thread guide
from back to front.
How to Thread the Lower Looper
Pass the thread through @ Pass the thread through the
holes on the right side of
right side of thread guide
thread guide plate as illu-
sliding the thread from left
strated.
to right.
Cut the both needle threads as shown in the figure and remove
them from the needles.
Thread the lower looper and then re-thread the needles.