Sears OVERLOCK 385. 564180 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 2. PREPARE YOUR

machíne

FOR SEWING

(3)

Insert the thread between tension discs from

the right. Then pull both sides of thread.

Turn the hand wheel toward you to bring

needle bar to its highest position, then pass

the thread through right needle thread

guide and thread take-up leverthread guide.

(e) Pass the thread through the thread guide sliding

the thread from left to right.

(T) Pass through needle bar thread guide from left

to right.

@ Thread the right needle from the front to the

back and pull the thread about 10 cm (4")

from the eye of the needle to the back under

the foot.

NOTE; Needle may be easier to thread if you

remove presser foot {See page 27) and

lower knife (See page 29).