Removing the presser foot, Attaching the presser foot – Sears OVERLOCK 385. 564180 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Removing the Presser Foot

SECTION_3. LEARN THE STITCHES_

Attaching the Presser Foot

(5) Press the lever located on the back ot foot

holder. The presser foot will drop off.

Place the presser foot so that the pin on the foot

lies just under the groove of the foot holder.

Lower the foot holder and push the lever to lock

the foot in place. Raise the presser foot lifter to

check that the presser foot is secure.