Sears KENMORE 385. 12708 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTIONS. CARE FOR THE MACHINE
Replacing the Light Bulb
Cleaning the Machine
1.
Unplug the
face cover.
machine and open the
CAUTION!
The
light
bulb
could
be
HOT.
Protect
your
fingers
when
you
handle
it.
2.
Push the bulb up and turn the
bulb
counter-clockwise
to
remove
it.
3.
Put the new bulb in by pushing it
up and turning it clockwise.
To insure that your machine operates at its best, you need to keep the essential parts clean at all times.
The feed dogs and shuttle race areas can attract dust and lint. Your machine can become sluggish or knock loudly if a thread
is caught.
Check and clean those areas about every three months under normal use.
If you sew frequently, clean more often.
• Clean the Feed Dogs
Follow these directions:
1.
Unplug
the
machine,
presser foot and needle.
Using
a
screw
driver,
needle plate.
Remove 2.
remove
Use a lint brush to clean the feed
dogs.
3. Replace needle plate.
38