Set up the machine {continued) – Sears 385.1884180 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set Up the Machine {Continued)
« Set the Speed Range Switch
SECTION 2. PREPARE YOUR MACHINE FOR SEWiNG
Your machine has two ranges of speed------- a low range for slower, intricate
work and a high one for faster, general work. On the low setting the machine
will sew no faster than approximately two-thjrd the speed of the high one,
even when the foot control is fully depressed.
NOTE; It is advisable not to change the speed range switch while
machine Is running.
« Set the Pressure Dial
Set the dial aligning the setting mark on the dial vvith the groove as follows.
3 . , . , most sewing
2
,
applique and Cut-Outwork
1 .
. , basting, sewing chiffon, lace, organdy and other lightweight fabrics.
Also for velours and knits (with more stretch).
NOTE:
The pressure dial should be reset at 3 after changing pressure, so
the machine is ready for most normal sewing the next time you use
it.