Routing, Freehand routing, Operation – Sears 315.17506 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
ROUTING
See Figure 9.
For ease of operation and maintaining proper control, your
router has two handles, one on each side of the router base.
When using your router hold it firmly with both hands as
shown in figure 9. Turn router on and let motor build to its full
speed, then gradually feed cutter into workpiece. Remain
alert and watch what you are doing. DO NOT operate router
when fatigued.
FREEHAND ROUTING
See Figure 10.
When used freehand, your router becomes a flexible and
versatile tool. This flexibility makes it possible to easily rout
signs, relief sculptures, etc.
There are two basic techniques for freehand routing:
■
Routing letters, grooves, and patterns into wood.
See
Figure 10.
■
Routing out the background, leaving the letters or
pattern raised above (be surface.
When freehand routing, we suggest the following;
■
Draw or layout the pattern on workpiece.
■
Choose the appropriate cutter.
NOTE: A core box or V-groove bit is often used for
routing letters and engraving objects. Straight bits and
ball mills are often used to make relief carvings. Veining
bits are used to carve small, intricate details.
■
Rout the pattern in two or more passes. Make the first
pass at 25% of the desired depth of cut. This will
provide better control as well as being a guide for the
next pass.
■
DO NOT rout deeper than 1/8 in. per pass or cut.
HANDLE
FREEHAND ROUTING
Page 13