Mainfenonce, Lubrication, Recommended accessories – Sears 113.21371 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
mainfenonce
WARNING: FOR YOUR OWN SAFETY, TURN SWITCH
"OFF" AND REMOVE PLUG FROM POWER SOURCE
OUTLET BEFORE MAINTAINING OR LUBRICATING
YOUR DRILL PRESS.
Frequently
blow
out
any
dust
that
may
accumulate
inside
the motor.
A
coat
of
automobile-type
wax
applied
to
the
table
and
column will help to keep the surfaces clean.
If
the
power
cord
is
worn
or
cut,
or
damaged
in
any
way,
have it replaced immediately.
For motor maintenance, follow instructions furnished with
motor.
lubrication
All of the BALL BEARINGS are packed with grease at the
factory. They require no further lubrication.
Periodically lubricate the SPLINES (grooves) in the spindle
and the RACK (teeth on the quill).
USE Sears Gear Case Lubricant.
1.
Lower quill and spindle all the way down . .. LOCK
the quill.
2.
Use a small stick of wood and apply lubricant around
the inside of the hole in the spindle pulley.
3.
Apply lubricant to RACK (teeth) on quill extending
below drill press head.
For motors lubrication, follow instructions furnished with
motor.
recommended accessories
Drills, Shaper Cutters, Router Bits .................................................See Catalog
Rotary Planer ........................................................................................ 9-2745
Mortising Chisel Housing ........................................................................... 9-2465
Hollow Chisels and Mortising Bits.................................................. See Catalog
Dovetailing Attachment .............................................................................9-2462
Shaper Fence Attachment ......................................................................... 9-2487
Hold-Down and Guide .............................................................................. 9-2457
Drill Press Vises ......................................................... .. See Catalog
Rotary Table ........................................................................................ 9-2495
Tilt Table ..............................................................................................9-2439
Collet Chuck ........................................................................................ 9-24672
Shaper Cutter Adapter ....................................... ..
Sanding Drum..................................................
Hole Saws up to
2'A
in. dia..................................
Wire Wheels up to 4 in. dia. max. .
Buffing Wheels up to 4 in. dia. max.
Polishing Wheel, 114" x 1 In.................................
Column Collar ..................................................
Power Tool Know-how Handbooks
Radial Saw ..............................................
Table Saw ...............................................
..................... 9-24832
9-2497
-
9-2498
. . . . See Catalog
..........See Catalog
..........See Catalog
...................... 9-64991
......................... 9-2438
,
9-2917
, 9-2918
The
recommended
accessories
listed
here
are
current
and
were available at the time this manual was printed.
18