Operation and adjustment, Adanger – Sears PRO FORM 831.29776 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/718333/9/background.png)
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE™ WALKING BELT
Your treadmill features a walking belt coaled with
PERFORMANT LUBE™, a high-performance lubricant.
IMPORTANT; Never apply silicone sprayer other
substances to the walking belt or the walking plat
form. They will deteriorate the walking belt and
cause excessive wear.
HOW TO PLUG IN THE POWER CORD
ADANGER
Ü Improper connection
ï'oÎF thé equipmen^grbunding conductor ran
: result in an increased risltbf electric shock.
Check with a cjualifled electrician or seryice-
man if you are in doubt as to whether the
^ product is properly grounbed. bo hot rriodify
i the plug provided with thé product—if it will
not fit the outlet, have a proper outlet in- :
stalled by a qualified electrfci^ .
Your treadmili, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home’s power.
Voltage surges, spikes, and noise interference can re
sult from weather conditions or from other appliances
being turned on or off.
To decrease the pos
sibility of your tread
mill being damaged,
always use a surge
protector(not in
cluded) with your
treadmill.
electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. Plug the power cord into a surge
protector, and plug the surge protector into an ap
propriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
This product is for use on a nominal 120-voIt circuit,
and has a grounding plug that looks like the plug illus
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing
2
may be
used to connect the surge protector to a 2-pole recep
tacle as shown in drawing 2 if a properly grounded out
let is not available.
'
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear. lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec
trician to determine if the outlet box cover Is
grounded before using an adapter.
Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.
This product must be
grounded. If it should
malfunction or break
down, grounding pro
vides a path of least re
sistance for electric cur
rent to reduce the risk of