Sears PRO FORM 831.29776 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4. Attach the Pulse Sensor (114) to the Headband (115).

Make sure that the sensor window is pressed through

the indicated hole in the Headband.

Press open the clothes clip, and insert the pulse sensor

wire into the clothes clip. Make sure that the pulse

sensor wire Is resting against the hinge of the
clothes clip (see the Inset drawing). The use of the

pulse sensor is explained on page 8.

5. Remove the bacidng from the Adhesive Clip (90). Press

the Clip onto the Rear Roller Cover (82) in the indicated

location. Press the Alien Wrench (89) into the Clip.

Make sure that all parts are tightened before you use the

treadmill. Note: To protect the floor or carpet, place a mat

under the treadmill. For Information on ordering a mat,
see REPLACEMENT PARTS on the back cover.