Humidifier operations, Assembly – Sears 758.14451 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Humidifier Operations
Your new Sears humidifier is designed to
satisfy home humidity requirements
through the principle of evaporation of
water into the air.
After water is added to the bottle, the fit
ters begin to soak up the water and
become totally saturated in approxi
mately 30 minutes. Air is drawn in from
the rear of the humidifier, then passes
tfirough the fitters by means of a circula-
tioh fan; As air passes through the filters,
moisture is absorbed into the air and then
released through the top of the hurnidifìer.
This moist air is released in thè form of
vapor. No water droplets will enter the
home. Aii evaporatiori into the air takes
place irr the humidifier, which means that
the residue left by evaporating water is not
passed into the home, but remains in the
filter
\
CAUTION: Use only 42-14900 EPA
Registered Bacteriostat available
from SEARS Retail store. Under no
circumstances should you Use water
freatenent products designed for
Roto belt or Ultrasonic humidifiers.
Assembly
Your new Sears Kenmore humidifier is
completely assembled for you to use.
iHumidified Airis
Then Released
Through the Top
Dry Air
Enters
Through the
Rear
CAUTION: Keep your humidifier
clean. While humidifiers do not
cause colds, some studies suggest
that dirty humidifiers can cause cold
like symptoms in some people. To
avoid this, we recommend you clean
your humidifier weekly vwth Humidi
fier Cleaner 42-14713 and use Bacte
riostat 42-14900. These are available
at your local Sears store.
Folfow the instructions of this owner's
manual for proper usage.