Replacement md cam of filters (continued) – Sears 758.14451 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Replacement md Cam of Filters (continued)

Remove the Iwo filters and dispose of

. ■ properly. I .. '

' I

b: Cleanirtternal parts of hurriidifier per

the “Cteanirtg of Humidifier" sectiorr
of your owner’s manual.

c. Install new filters inside the cabinet

with the glue beads on the filter fac

ing the center of the cabinet. The fil

ters should set into the channel
areas inside the cabinet. Make sure
the filters are resting on the floor of

the cabinet.

d. Return the filter housing to the cabi

net. Position the filter housing onto

the filters. Align the back of the filter

housing over the filters and between

the rear ribs of the cabinet. Place
the filter housing down onto the fit
ters, Make sure the filters are cap
tured inside the side flanges of the

filter housing,

e. Position fan assembly onto the cabi

net. Make sure the fan venturi (low

est cylinder section, below thefatrj is

placed inside the filter housing. The

left edge of the fan assembly hous
ing should rest in the groove of the
cabinef \

■

f Replace ttie water bottle and the

water bottle cover The right edge of
the bottle cover will rest in the

. groove of the cabinet mentioned

i'-above,: '

. : "

, '

g. The unit is: ready for use or to be

. Stored away for next season.