Customer responsibilities, General recommendations, Blade care – Sears 917.249491 User Manual
Page 12: Storage, To remove grass catcher
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CUSTOMER RESPONSIBILITIES
GENERAL RECOMMENDATIONS
Always observe safety rules when performing any mainte
nance.
•
Before each use check for ioose fasteners.
•
Clean unit thoroughly after each use.
Re-
BLADE CARE
For best results mower blades must be kept sharp,
place bent or damaged blades
• See BLADE CARE instructions in your tractor owner's
manual.
CAUTION: BEFORE PERFORMING ANY
MAINTENANCE , SERVICE OR ADJUST
MENTS:
Depress clutch brake pedal fully and set
parking brake.
Place gearshift/motion control lever in
"NEUTRAL" position.
Place clutch control in "DISENGAGED"
position.
Turn ignition key to "OFF" position.
Make sure blades and ail moving parts
have completely stopped.
Disconnect spark plug wire(s) from spark
plug(s)and place wire where it cannot come
in contact with plug.
STORAGE
When grass catcher is to be stored for a period of time,
clean it thoroughly, remove all dirt, grass, leaves, etc. Store
in a clean, dry piace.
A
CAUTION: Do not leave grass in bagger
containers. Empty containers after each
use and before storing. Failure to do so
may result in spontaneous combustion
which could develop into a fire.
TO REMOVE GRASS CATCHER
Reverse appropriate steps in ASSEMBLY section of this
manual.
A
CAUTION: Grass catcher components are
subject to wear, damage and deteriora
tion, which could expose moving parts or
allow objects to be thrown. Frequently
check components and replace with
manufacturer's recommended parts, when
necessary.
12