Sears 536.79751 - Manual (Page 3)

SAFETY RULES
SAFE STORAGE
• Always refer to the owner’s manual storage
section for important details if the edger is to
be stored for an extended period*
" Never leave the edger with fuel in the fuel tank
inside a building where ignition sources are
present such as water and space heaters,
clothes dryers, and the like. Allow the engine to
cool before placing in any enclosure.
* Keep the edger in safe working condition.
Check all fasteners at frequent intervals for
proper tightness.
REPAIR/ADJUSTMENTS SAFETY
® After striking a foreign object, stop the engine
(motor}- Remove the wire from the spark plug,
and keep the wire away from the plug to
prevent accidental starting. Thoroughly inspect
the edger for any damage, and repair fhe dam­
age before restarting and operating the edger.
® if the edger should start to vibrate abnormally,
stop the engine (motor) and check immedi­
ately for the cause,, Vibration is generally a
warning of trouble.
Stop the blade whenever you leave the oper­
ating position. Also, stop the engine and dis­
connect the spark plug wire before unclogging
the blade and when making any repairs, ad­
justments, or inspections.
When cleaning, repairing, or inspecting, shut­
off the engine and make certain ail moving
parts have stopped.
Never attempt to make any adjustments while
the engine is running (except when specifically
recommended by the manufacturer).
LOOK FOR THIS SYMBOL TO POINT OUT
IMPORTANT
SAFETY PRECAUTIONS. IT
MEANS-ATTENTfONUl BECOME ALERT!!!
YOUR SAFETY IS INVOLVED.