Operation and adjustment, A danger – Sears CROSS WALK 831.297311 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/718107/6/background.png)
OPERATION AND ADJUSTMENT
APPLYING SIUCONI LUBRICANT
To reduce the friction of the walking belt and minimize
wear, a non-oil, non-petroleum-bose silicone lubricant
must be applied to the walking platform before the
CROSS WALK is used. WITH THE POWER CORD
UNPLUGGED, lift each side of the walking belt and
spray lubricant generously onto the area shaded in the
drawing below. Reapply lubricant after every ten hours
of use, or whenever performance decreases. Lubricant is
available at hardware and automotive stores.
Uni^Sport^*^ spray is recommended.
has a grounding plug as shown in Drawing 1 below.
This product must be grounded. If it should malfunction
or break down, grounding provides a path of least resis
tance for electric current to reduce the risk of electric
shock. This product is equipped with a cord having an
equipment-grounding conductor and
a
grounding plug.
Plug the power cord into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances.
A DANGER
! Improper connection of the
equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or ser
viceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided
with the product—if it will not fit the outlet, have a prop
er CHJtlet installed by
a
qualified electrician.
This product is for use on a nominal 120-volt circuit, and
A temporary adapter like the adapter shown in Drawing
2 may be used to connect this plug to a 2-pole recepta
cle as shown in Drawing 2 if a properly grounded outlet
is not available.
The temporary adapter should be used only until
a
prop
erly grounded outlet (Drawing 1) can be installed by a
qualified electrician. The green-colored ear, lug, or the
like extending from the adapter must be connected to a
permanent ground such as
a
properly grounded outlet
box cover. Whenever the adapter is used, it must be
held in place by a metal screw.
Some 2-pob receptacle outlet box covers are not
grounded. Contact
a
qualified electrician to defennine
if the ouHet box cover is grounded before using an
adapter.
6