Assembly – Sears CROSS WALK 831.297311 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY

The CROSS WALK is shipped in the compact stowaway position. Set the CROSS WALK in a cleared area and remove

all packing materials. Make sure that all parts have been removed before you dispose of the packing materials.

Follow the instructions below to convert the CROSS WALK to the operating position. No tools are required.

1. Raise the Upright (10) to the vertical position. Slide the Lock Knob

Washer (78) onto the Lock Knob (77). Tighten the Lock Knob into the

Upright.

2. Remove the paper backing from the Wrench Clip (65). Press the

Wrench Clip onto the Right Roller Bracket (62) in the indicated loca

tion. Press the Allen Wrench (66) into the Wrench Clip.

Make sure that all parts are tightened securely befe>re using the tread

mill. Note: To protect the floor, a covering shcwld be traced under

the treadmill.