How to set the oven for cleaning, Clean cycle, After a clean cycle – Sears 72671 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

How to Set the Oven for Cleaning
Quick Reminder:
1. latch the door,
2. Turn the OVEN SET knob to CLEAN.
If the oven is too hot and you start to set a clean cycle,
you will not be able to slide the latch.
Allow additional time for cooling before you cry to set
the cycle.
1. Follow directions to prepare the oven for cleaning,
2.
Slide the latch handle to the
right as far as k will go.
Never force the latch
handle. Forcing the handle
will damage the door lock
mechanism.
^ Turn flip OVEN SFT knob m CT FAN The SFT F
xU-Ill OiC. ¥ x-i V 01--X Ivllv/U Lk/ wx^JLiTlLL v.. JL llv
CLEAN DOOR LATCH, AUTOMATIC OVEN,
OVEN ON and COOK TIME. ON/OFF lights
will glow.
NOTE:
If you turn the OVEN SET knob before
yon slide the latch, the SELF CLEAN DOOR
LATCH light will flash. Slide the latch to the right.
Clean cycle time Is normaUy 4 hours and
20 minutes.
On some models you can change the
Clean Time to anywhere between 3 hours and 5 hours,
and 59 minutes, depending on how dirty your oven is.
"Xbu have one miiiute to change your Clean Time.
Use the HOUR and MIN. pads to change the total
Clean lime.
Both the OVEN ON light and the SELF CLEAN
DOOR LATCH light will flash when the Clean Time
is finished,
Aiiter using the clean cycle,
the door latch and the
OVEN SET knob must be returned to their original
positions before you can use the oven.
\
3
P!ipn riip SFT F ГТ PAM
t
lifrht
flashes, slide the larch handle to the left as far as it
will go, turn the OVEN SET Icnob to OFF and open
the door.
Never force the latch handle.
Wait until the SELF
CLEAN DOOR LATCH light flashes and the latch
slides easily. Forcing the latch handle may damage the
door lock.
Clean Cycle
. Turn the OVEN SET knob to OFF.
2. Wait until the oven has cooled below the locking
temperature to unlatch the door. You will not be
able to open the door right away unless the oven has
cooled below the locking temperanxre.
After a Clean Cycle
Ifou may notice some white ash in the oven.
Just
wipe it up with a damp cloth after the oven cools.
If white spots remain,
remove them with a soap-filled
steel wool pad. Be sure to rinse thoroughly with a
vinegar and water mixture. These deposits are usually a
salt residue that cannot be removed by the clean cycle.
If the oven is not dean after one clean cycle,
repeat the cycle.
NOTE:
• You cannot set the oven for cooking until the oven is
cool enough for the door to be unlatched.
• While the oven is self-cleaning, you can press the
CLOCK pad to display the time of day. To return
to the clean count down, press the COOK TIME
ON/OFF nad
X UcLLi«
(continued next page)
25