To set the time of day clock, To set the timer, To reset the timer – Sears 45320 User Manual
Page 6: To cancel the timer, End-of-cycle tone, Clock and timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLOCK AND TIMER
The CLOCK and TIMER are operated by four touch pads.
The CLOCK and TIMER do not control the oven.
E)
TO SET THE TIME OF DAY CLOCK
1. Press CLOCK.
2. Use the
UP or DOWN touch pad to set the correct
tinte of day.
3.
Theclockwlllstartkeeplngtimeandthewords“$ET
TIME” will disappear within the next 60 seconds.
TO SET THE TIMER
The
TIMER displays hours and minutes. The maximum
setting Is 9 hours and 45 minutes on the
TIMER. Seconds
will be displayed during the countdown of the last
minute only. The
TIMER will beep when one minute
remains in the countdown. Seconds will be displayed
during the last minute countdown.
”HRiMIN” will
disappear from display.
1.
Press
TIMER ON/OFF. “00” appears and “SET
TIMER” flashes. “HRiMIN” appears.
2. Select the desired time using the
UP or DOWN touch
pad. The
TIMER will begin to count down and “SET
TIMER” will disappear about 4 seconds after you
select the time. If you do not wish to wait
4 seconds,
press
TIMER and the countdown will begin
immediately.
TO RESET THE TIMER
To reset the timer during countdown use the
UP or
DOWN arrow pad. “SET TIMER” will flash and you can
reset the
TIMER. The TIMER will count down from the
new time you select and
“SET' will disappear in about
4 seconds.
TO CANCEL THE TIMER
If you wish to cancel the
TIMER while It is counting
down, press
TIMER ON/OFF. The word “TIME” will
disappearfrom the display and the display will return to
the time of day.
If you wish to cancel the
TIMER while “SET TIMER” is
flashing in the display, press
TIMER ON/OFF twice.
END-OF-CYCLE TONE
The
END-OF-CYCLE tone will sound when the TIMER
countdown is complete. The display will show “00” and
you will hear a series of beeps. Press
TIMER ON/OFF
or
CLOCK to stop the tone.
NCCTL25