Howto start, Warning, How to start – Sears L0711256 User Manual

Page 8: Use howto start

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USE

HOWTO START

WARNING

Personal Injury and Product Damage
Hazard

• DO NOT plug in if switch is in ON

position. Personal injury or
damage could result.

• The cord moves rapidly when

rewinding. Keep children away

and provide a clear path when
rewinding the cord to prevent
personal injury.

• DO NOT use outlets above

counters. Damage to items in
surrounding area could occur.

Cord

Rewind
Bar

1. Pull cord out of

canister to desired
length. The cord
will not rewind untii

the cord rewind

bar is pushed.

NOTE:

To reduce the risk of eiectric shock,

this vacuum cleaner has a polarized plug,

one blade is wider than the other. This plug

wili fit in a polarized outiet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con
tact a qualified electrician to install the prop
er outlet. Do not change the plug in any

way.

Plug the polarized power cord into a 120

Volt outlet located near the floor.

To rewind;

Unplug the cleaner. Hold the

plug while rewinding to prevent damage or
injury from the moving cord. Push cord
rewind bar.

3. Lower wand from upright position by
pressing on the handle release pedal.

Select a pile height setting by pressing

the small pedal on the rear of the POWER

MATE™. The pile height setting shows on

the indicator. See SUGGESTED PILE
HEIGHT SETTINGS.

Select a switch
position on the
handle.

OFF

FLOOR

- turns on the canister motor only,

CARPET

- turns on both the canister and

the POWER-MATE™ motors.