Sears L0711256 - Manual (Page 10)

ATTACHMENTS
A
CAUTION
DO NOT attach or remove handle or
wands while cleaner is ON. This
could cause sparking and damage
the electrical contacts.
ATTACHMENTS ON HANDLE
NOTE: If the
POWER­
MATE™ is
attached, turn
cleaner off
before removing
handle from
wands.
1. Press lock
button, then pull
to remove han­
dle from wand.
If your model has the optional feature of a
handle release, press it In similarly.
2. Slide attach­
ments firmly on
handle as need­
ed. See chart
below.
ATTACHMENTS ON WANDS
1. To remove
wands from
POWER­
MATE™, lock
wands in
straight-up
position.
2. Press wand
reiease pedal
with foot and
puli the wands
straight up out of
POWER-MATE™.
The POWER­
MATE™ plug and
cord do not have to
be removed to use
attachments on the
wands.
3. Put attach­
ments on
wands as
needed. See
chart below.
ATTACHMENT USE CHART
CLEANING AREA
ATTACHMENT
Furniture*
Between
Cushions* Drapes* Stairs
Bare
Floors
Carpeted
Floors/Rugs Walls
DUSTiNG BRUSH X X X
CREVICE TOOL X X
FABRiC BRUSH X X
FLOOR BRUSH X X X
POWER-MATE™
X** X
NOTE: When separating wands, depress lock button completely before pulling wands apart. If wand lock button is diffi­
cult to depress, push the two wands more tightly together to line up the lock button with the hole, Depress lock button
and then pull wands apart.
-
10