Assembly, Warning, Wands – Sears L0711256 User Manual

Page 6: Power-mate

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY

Before assembling your vacuum cleaner, be
sure you have all parts shown in PARTS

AND FEATURES.

WARNING

Electrical Shock Hazard

DO NOT plug into electrical supply
until assembly is complete. Failure

to do so could result in electrical

shock or injury.

Button

WANDS

Slide wands
together until

wand button

snaps into place.

Turn wand button
to the slotted

area of the wand
swivel.

The swivel allows
you to turn the
handle to the left
side to reach far
ther under low

furniture.

POWER-MATE™

1. Insert wands into POWER-MATE™ until

the wand buttons snaps into place.

2. Connect
POWER-MATE™
plug and cord as
shown.

DO NOT

force.

Raised area

of plug must be
toward hand.

3. Secure cord into
cord holder on

wand swivel.

To remove:

Disconnect cord and step on

wand release pedal, then pull up on wands.