Sears 274.4279839 - Manual (Page 9)

Using Your TV and Remote
With Remote Buttons
OFF VCR1, AUDIO TV
ON/OFF-LDISC-CABLE
REW FF STOP PlAY
REC CLEAR PROG PAUSE
CHAN
INPUT 0,^^ ANT
PIP MOVE FRZ SWAP
1. Power Buttons
OFF
Turns off the TV.
Turns off compatible VCRs.
ON/OFF
Turns on a component after a
component button is pressed.
Turns off components except audio
equipment.
2. TV Buttons
CLEAR
Clears menus and displays from
the screen.
DISPLAY
Shows displays on the screen.
Clears menus from the screen.
SKIP:30 (Commercial Skip)
Allows you to scan other channels
during commençais.
Each press adds 30 seconds. TV
switches back to original channel
when time runs out. Press
CLEAR
to cancel SKIP.
VCL (Volume)
Raises and lowers sound.
Moves left and right on a menu
line. See Quick Guide to the Menus
on page 5.
Changes a feature setting.
MUTE
Turns off the TV sound.
3. Number Buttons
(0-9)
Selects any channel number.
Two numbers must be pressed for
each channel. Press 0 and 6 for
channel 6.
TV
Turns on the TV.
Shows the displays on the screen.
Sets the remote to control the TV.
See Using the Remote with a VCR,
Cable Box, Laserdisc Player and Audio
equipment on pages 8-15.
CHAN (Channel)
Scans up and down through
channels in the TV's memory.
Mov'es up and down menus. Sec
Quick Guide to the Menus on page 5.
Moves through channels
in VCR's memory.
PREV CHAN (Previous Channel)
Changes back and forth between
two channels.
Select a channel and then select
another. Press PREV CH.AN to
switch between the two channels.
MENU
Shows menus on the screen and
moves from menu to menu.
RESET
Returns the picture adjustments to
the original settings.
DONE .
Saves the setup of a feature and
removes the menu from the screen.
For three digit channels, press and
hold 1 until 1— appears on the
screen. Then press the other two
numbers.