Sears 274.4279839 - Manual (Page 18)

With Audio Equipment: Programming and Basic Operation
Refer to the Connection Book or i/oiir Audio equipment oicner's numual to hook
up your audio equipment. Your remote controls some audio equipment
such as a radio, CD player, tape player, turntable, or amplifier. The
remote may need to be programmed for your equipment. Use the codes
below or on the sheet packed in with your remote.
Using Your TV and Remote
Program the remote for
audio equipment
Basic Operation
Audio Codes
RCA/ Dimensia
.AM/FM.................... ....03
CD........................... ....07
Tape........................ ....06
Phono ..................... ....05
Aux.......................... ....04
A. Point the remote at the audio
equipment and hold AUDIO.
B. Enter the code from the code
list.
C. Release AUDIO.
D. Press ON/OFF to turn it on. If
nothing happens, try pressing
AUDIO and then ON/OFF.
E. Repeat A-D with another code
if the first one does not work.
A. Point the remote at the audio
equipment and press AUDIO.
B. Press ON/OFF to turn it on.
C. Use the buttons on the remote
that relate to audio functions.
Not all buttons highlighted
may work with your
equipment.
D. Turn the audio equipment off
using the audio component's
power off button.
15