Sears 274.4279839 - Manual (Page 16)

With a Cable Box; Setting the Cable Channel
The Cable Channel works with CABLE on the remote. If the Cable
Channel is set, pressing CABLE selects the channel to see cable channels.
The Cable Channel setting depends on which channel your cable box
must be on to see cable channels. Tha channels usually used are 02, 03,
04,05 or 06. Consult your cable company for more information.
Using Your TV and Remote
1. Select the Setup menu
13
Controls Alarm Adjust Setup
Autoprogram
Label 13 clear
Channel Memory; 13 Stored ,
Cable/Air: Cable L
Cable Channel: 02
A. Press TV to set the remote to
control the TV.
B. Press MENU to select the Setup
menu. This menu is white.
2. Highlight Cable Channel
13
Controls Alarm Adjust Setup
Autoprogram ■
Label 13 clear
Channel Memory: 13 Stored
Cable/Air: Cable ^ v
Cable Channel: 02
A. Press CHANNEL down to move
down the menu until Cable
Channel is highlighted.
B. Press + to underline the
channel.
3. Enter channel number
4. Press DONE to save the
setting
13
Controls Alarm Adjust Setup
Autoprogram
Label 13 clear
Channel Memory: 13 Stored
Cable/Air; Cable
Cable Channel; 03
A. Enter the number for your cable
box, either 02,03,04,05, or 06. •
B. Press DONE to save the setting.
13