Required cords, Q optical digital cord, Getting started – Sony HT-DDW660 User Manual
Page 5: Connecting your components, Sjtbbi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
1: Connecting your components
Required cords
The hookup diagram on page 6 assume the use of the following optional eonneetion eords (0 to B)
(fi C/) 3. (D Q. (not supplied unless indieated). A Audio cord White (L) Q Optical digital cord Red (R) B Coaxial digital cord (supplied) sjTBbi c =CB e = i = Orange Notes • Turn off the power to all eomponents before making any eonneetions. • Be sure to make eonneetions firmly to avoid hum and noise. • When eonneeting an audio eord, be sure to mateh the eolor-eoded pins to the appropriatejaeks on the eomponents: white (le^, audio) to white; and red (right, audio) to red. • When eonneeting optieal digital eords, insert the eord plugs straight in until they eliek into plaee. • Do not bend or tie optieal digital eords. continued m ^GB
a>