Sony HT-DDW660 - Manual (Page 32)

If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy the
problem (page 10). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver’s memory
To clear See
All memorized settings page 10
Customized sound fields page 21
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code U only)
With 6 ohm loads, both channels driven, from
120- 20,000 Hz; rated 50 watts per channel
minimum RMS power, with no more than 0.7%
total harmonic distortion from 250 milliwatts to
rated output.
Amplifier section
Power Output 1)
Models of area code U
(6 ohms 1 kHz, THD 10%)
FR0NT 2) : 70 W/ch
CENTER 2) : 70 W
SURR 2) : 70 W/ch
(6 ohms 100 Hz, THD 10%)
SUB W00FER 2) : 70 W
Models ofarea code SP, MX, E51
(6 ohms 1 kHz, THD 0.7%)
FR0NT 2) : 50 W/ch
center 2 *: 50 W
SURR 2) : 50 W/ch
(6 ohms 100 Hz, THD 0.7%)
SUB woofer 2 *: 50 W
(6 ohms 1 kHz, THD 10%)
front 2 *: 70 W/ch
center 2 *: 70 W
SURR 2 *: 70 W/ch
(6 ohms 100 Hz, THD 10%)
SUB woofer 2 *: 70 W
1) Measuredunderthe following conditions:
Area code Power requirements
U, MX 120 V AC, 60 Hz
SP 230 V AC, 50 Hz
E51 240 V AC, 50 Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
DVD, video Sensitivity: 800 mV
Impedance: 50 kiloohms
32 GB