Emerson ITONE IP100C - Manual (Page 7)

operating INStRjJC^^
P!aying your iPod®
Important
To prevent distortion during iPod® playback you should go to the IVIain Menu
of your iPod® , select the Settings Menu page, select the EQ Setting, and make
sure that the EQ function is set to "Off*.
(Main Menu Settings Menu EQ Setting Select "Off” )
p
©1
After inserting your iPod®
in the dock as described
above, set the POWER switch
of this system to the 'On'
position, and the FUNCTION
switch to the iPod® position.
If necessary, release the HOLD
switch on your iPod® and turn
it on.
Select the song or album that
you wish to play on your
iPod® using the click-wheei
navigation controls as usual
Use the VOLUME control on
this system to increase or
decrease the speaker volume
level. The volume control on
your iPod® has no effect on
the speaker volume levei.
When you зге finished listening
press the POWER button to
turn this system 'Off, The
display lighting wili turn off.
If you are using the AC adapter,
the charging indicator will
appear on your iPod® display
Important Note
To prevent damage to your iPod® we recommend that you do not play your
iPod® when you are carrying this system around as a portable. The system
should be placed in a stable, secure position before connecting and
operating your iPod® ,
11
OPERATING INSTRUCTIONS(CONTINUED)
Listening To A Non-Docking iPod® Or Other Portable Music Player
Some early iPod® models and the iPod® Shuffle do not include the 30-pin docking connector
found on most other iPods®. We have provided an Auxiliary Input Jack on the back panel of this
system and included a stereo connection cable so that you can still connect non-docking
iPods®, other MP3 players, or personal CD players to this system.
Locate the stereo connection
cable supplied with this system. Connect one end of the
3.5mm stereo cable into the
auxiliary
input jack (AUX)
located on the back of the
unit, and other end to the
headphone or line out jack
on your portable audio
device.
Set the POWER button to the ’On’
position and (he FUNCTION button
to the AUX position. Also turn on
your external portable audio
player.
Use the VOLUME control to
adjust the system volume.
You may need to adjust your
device volume, loo. When you are finished listening
set the POWER button to the
‘Off position. Remember to shut
off the power to your portable
audio piayer as well.
important Note
Remember to disconnect the stereo connection cable from the Aux Jack before inserting an
iPod® in the docking station.
12