Philips TP3669C - Manual (Page 33)

S electing the P icture S ource for
PIP n
J ^he picture for the PIP window
can come through the TV’s
ANTENNA or VCRIAUX Inputs (on
the rear of the TV.) The PIP INPUT
control simply tells the TV which one
of these two sources it is to show in
the PIP window.
C begin !
<0>
Press the MENU (M) button on
the remote, then press the MENU A
or T buttons to select the words PIP
INPUT with the TV’s on-screen
arrow.
Press the (+) button to select the
source for the PIP picture:
ANTENNA -
for a picture signal coming from
the ANTENNA input on the rear of
the TV.
VCR/AUX -
for a picture signal coming from
the Video Input jack on the rear of
the TV. Used for VCR (or other
direct video accessory) connec­
tions.
Note: The TV’s S-VIDEO Input
plug cannot be used for the PIP win­
dow. Also, when S-VIDEO is select­
ed for the main screen INPUT the
PIP window will not appear.
Press the STATUS button to
clear the screen.
/ S mart H elp
Remember, the PIP screen
~ will be blank unless a signal is
connected to the selected source
(either ANTENNA or VCR/AUX) on
the rear of the TV.
With ANTENNA selected (as the PIP
INPUT source), the main screen and
PIP window will show the same pic­
ture. The VCR/AUX inputs (on the
rear of the TV) must be used in order
to see a different channel or picture
source in the PIP window.
For details on how to view separate
programs on the PIP window and main
screen, sec the PIP connection section
33