Tiirn the vcr and tv on, Press the pip on/off button – Philips TP3669C User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

A Tow that you have completed the

1 y required connections on the pre

vious page you are ready to follow

the simple steps shown below.

<|> Tiirn the VCR and TV ON.

Place the VCR in the TV mode -

Use the TVA^CR button on the
VCR (or on the TV remote if it is
set to work your VCR - See page .)

Place the TV’s PIP INPUT control
to “VCR/AUX” -

Press MENU

or ▼ on the TV

(or on the remote press M button
and then M AV buttons.)

Select the words PIP INPUT with
the TV’s on-screen Arrow. Then
press the (+) button to select
VCR/AUX.

Make sure the TV’s “INPUT” on
screen control is set to ANTENNA.

Select the channel on the VCR to

view in the PIP window. Select the
channel on the TV to view on the
main screen.

Press the PIP ON/OFF button

on the remote.

The PIP window should show in one
of the comers of the TV screen.

/ S

mar

kli

Remember, if you see the

~ same picture on the main

screen and in the PIP window, you
need to be sure the TV’s PIP INPUT
control is set to “VCR/AUX.”

No sound will be heard with the PIP
picture. See page on how to “SWAP”
the PIP picture with the main screen
picture so that sound can be heard.

Also, see the following page on how
to operate other PIP features with the
remote control.

VCR IN "TV MODE"

(VCR Indicator Light will go out)

PIP INPUT CONTROL SET TO "VCR/AUX"

TV - FOR MAIN SCREEN CHANNEL

VCR - FOR PIP CHANNEL

VCR

SELECTED

CHANNEL

SELECTED

CHANNEL

Be sure to point the remote at the
front of the VCR when pressing
VCR function buttons.