YSI 610 - Manual

1
FIELD OPERATION GUIDE
YSI 610 DISPLAY/LOGGER
CONNECTING TO A SONDE
Since YSI 6-Series sondes do not have displays or con-
trols, users must communicate to them with a PC or ter-
minal and emulation device. The figure below is a dia-
gram of the YSI 610 connected to any 6-series sonde.
68
20
610-DM
Envir onm ental
Monit or ing
Syst ems YSI
RUN
TMP 20.54
CND 0.687
DO% 97.5
DOc 38.0
pH 8.32
NO3 2.35 SpC 0.750
SAL
1.42
DO 8.56
DEP 10.12
ORP 90.2
TRB 2.3
610 Handheld Display
The 6-Series Sonde.
Two slide plug cable adapters are available for the com-
munications plug. One is for communication with a PC
and terminates in a 9-pin miniature sub-D connector.
When communicating with a PC, be sure to use a null
modem cable. The other adapter is for use with a sonde
and terminates in an 8 pin, military style connector. Plug
the MS-8 end of the cable into the sonde and the other
end into the YSI 610.
610-DM
Environmental
Monitoring
Systems
YSI
AC Adaptor for 120 VAC
DB-9 Pigtail
MS-8 Pigtail
Power Jack Module
Null Modem Cable