Vogelzang VG650ELG (new as of 2013) - Manual (Page 4)

Page 4 | VG650ELG MOUNTAINEER™ www .vogelzang.com VGZ-025 | 20120424.1
ASSEMBLY INSTRUCTIONS
NOTICE: Vogelzang grants no warranty, stated or implied, for the installation or maintenance of your wood stove and
assumes no responsibility of any incidental or consequential damages.
TOOLS
TOOLS AND MATERIALS REQUIRED FOR INSTALLATION
ŖPencil
Ŗ 6 foot Folding Rule or Tape Measure
Ŗ Tin Snips
Ŗ Drill: Hand or Electric
Ŗ 1/8” dia. Drill Bit (for sheet metal screws)
Ŗ Screwdrivers (blade and Phillips type)
Ŗ 14mm Nut Driver or Ratchet with 14mm Socket
Ŗ Safety Glasses
Ŗ Gloves
MATERIALS
(NOTE: The following items are NOT included with your stove)
Chimney Connector Pipe: 6” dia. minimum 24 MSG black or 26
MSG blue steel stove pipe or elbow(s) as required.
1/2” Sheet Metal Screws
Chimney: Existing 6” code-approved, lined masonry chimney
or 6” inside dia. Listed UL 103 HT manufactured chimney.
Furnace Cement (manufacturer recommends Rutland Code 78
or equivalent)
CAUTION: STOVE IS HEAVY. MAKE SURE YOU
HAVE ADEQUATE HELP AND USE PROPER
LIFTING TECHNIQUES WHENEVER MOVING
STOVE.
continued on next page
0RXQWLQJKROHV
RI)OXH&ROODU
7KHGDPSHUPXVWEH
LQVWDOOHGDVVKRZQLQ
WKLVLOOXVWUDWLRQ6OLGH
WKHGDPSHULQWRWKH
IOXHFROODURQDQ
DQJOHDQGWKHQVOLGH
WKHGDPSHUKDQGOH
WKUXWKHKROHVLQWKH
IOXHFROODU
FLUE COLLAR INSTALLATION
3HHORIIWKHWDSHEDFNLQJDQGDSSO\WRWKH
JURRYHRIWKHFROODU
0RXQWWKHFROODUWRWKHWRSRIWKHDSSOLDQFH
XVLQJWKHWKUHH[´%ROWV
ZDVKHUVDQGWKUHH:HOG7DEVSURYLGHGLQ
WKHSDUWVEDJ
5HPRYHWKHGDPSHUURGIURPWKHGDPSHU
WKHQUHLQVWDOODVVKRZQEHORZ