Vizualogic RoadTrip Elite 8 - Manual (Page 8)

Turning Power ON/ OF
1.
Press to turn ON.
2.
To turn off the power, press and hold again.
Placing Discs
1.
Turn on the power before placing discs.
2.
Place the disc with the label side facing you.
Once the disc is partially placed, it is drawn in
automatically. Playback starts.
normal operation of the DVD.
If wrong disc, upside-down disc or dirty disc have
been inserted. ”NO DISC” is displayed.
‧Be sure to put DVD in to the mortise, to ensure the
‧
Center Armrest Monitor
7
Ba sic Operations
Switching Source
1.
Press “SRC” to cycle through the different sources.
‧OSD (On Screen Display) will be turned off
automatically, when not operating more than 10
seconds.
Before Using the MMD
Before using the MMD, please remove the card from the
Multi Media Driver (MMD).
Card
Adjusting OSD
Visual brightness, color are adjustable.
‧
‧Make adjustments within 6 seconds, otherwise the
OSD (On Screen Display) will turn off automatically.
contrast and
Each source is independently adjustable.
Moni tor Set up
F/R
FM/IR (On/Off)
FM ON/OFF (Option)
1.
Press once: To turn ON/OFF the FM transmitter.
2.
When you turn on the FM, press or to
select desired FM frequency 87.7MHz ~ 88.9MHz or
OFF.
IR ON/OFF
1.
Press twice: To turn ON/OFF the IR.
2.
When you turn on the IR, press or to
select ON or OFF.
F/R
DVD AV IN1 AV IN2
OSD
Adjusting Brightness
1.
Press to select Brightness.
2.
Press or to adjust the brightness.
Brightness can be adjusted from -20 (MIN) to +20
(MAX).
Brightness
00
OSD
Adjusting Contrast
1.
Press to select Contrast.
2.
Press or to adjust the contrast.
Contrast can be adjusted from -20 (LOW) to +20
(HIGH).
Contrast
00
OSD
Adjusting Color Density
1.
Press to select Color.
2.
Press or to adjust the color density.
Change depth can be adjusted from -20 (MIN) to
+20 (R MAX).
Color
00
OSD
Resetting Picture Adjustment
1.
Press to select Reset.
2.
Press or to resetting adjustment.
Reset will be set up in 00(median).
To save adjustment or wait 10 seconds until OSD
disappear, the adjustment will be save automatically.
Reset
OSD
Adjusting Hue
1.
Press to select Hue.
2.
Press or to adjust the hue.
Hue tone can be adjusted from -20 (G MIN) to
+20 (G MAX).
Hue
00